Home > Knowledge > Content
Laser Marker Notes
- May 21, 2018 -

First, the laser marking machine should be used in dust-free and 10°C-35°C environment as much as possible to keep the optical device dry and dust-free. Usually need to ensure a separate closed workplace, to ensure indoor constant temperature, the ground should have a floor paint or tile, install air conditioning;

Second, the customer must provide the main power to support at least 2500W AC single-phase power supply, and the main power cord of the equipment provided by our company must be installed on an air switch to protect it, and it is forbidden to use the triangular plug;

Third, the main power provided by the customer must have a ground wire.

Fourth, the cooling water in the circulating water tank is best to use deionized water. If there is no deionized water, it can be replaced by distilled water. The circulating cooling water should be replaced after being used for a period of time (it is recommended to change the water at least two weeks) so as not to affect the laser efficiency. .